Operation Manual

285764

Automatic heat-up function

The automatic heat-up function temporarily increases the power

(setting ‘9.’) to heat the contents of the pan faster. This function

is available in all settings except the ‘Boost’ setting and setting

‘9.’.

Switching on the automatic heat-up function

The hob is switched on and a pan has been placed in a cooking

zone.

1. Use the

button in the desired cooking zone to select setting

'A.' (comes after '9.').

‘A.’ and ‘9.’ ﬂ ash alternately in the display.

Tip

A quick way of setting ‘A.’ is by setting the cooking

zone to ‘9.’ and touching the button once for

setting ‘A.’.

2. Use the

or the

button to set the desired power.

If you select power setting 4, ‘4.’ and ‘A.’ will ﬂ ash alternately in

the display. Attention! After 10 seconds, the

button works

as an off button).

3. When the pan has reached the desired temperature, the

automatic heat-up function automatically switches off and the

cooking zone continues at the set power.

The below table shows the duration of the automatic heat-up

function for each power setting:

Setting 1 2 3 4 5 6 7 8

Seconds 40 72 120 176 256 432 120 192

Switching off the automatic heat-up function

The hob is switched on. ‘A.’ and the power setting ﬂ ash

alternately in the display.

1. Touch the

button for the cooking zone.

A different power setting is shown in the display and ‘A.’ stops

ﬂ ashing. Or:

2. Select setting ‘9.’. Or:

3. Touch the

and the

button for the cooking zone at the

same time. The display shows setting ‘0.’, ‘A.’ stops ﬂ ashing

and the cooking zone is switched off.