Operation Manual

285764

Switching on the hob and setting the power

The power has 9 settings. There is also a ‘boost’ setting, which is

indicated by a ‘P.’ in the display.

1. Put a pan on a cooking zone.

2 Touch the On/Off button.

You will hear a short bleep and the display for each cooking

zone will show ‘0.’. The red light to the right above the On/Off

button

is constantly illuminated. If no further action is taken,

the cooking zone will automatically switch off after 10 seconds.

3. Use the button

or the button in the desired cooking

zone to choose the correct setting. The hob will automatically

start in the chosen setting (if it detects a pan).

- Touching the

button for the ﬁ rst time displays setting ‘4.’.

- Touching the

button for the ﬁ rst time displays setting ‘9.’.

Tip

You can touch and hold the or the button to set

the desired power faster.

• Pan detection

- If the hob does not detect a (ferrous) pan after the cooking

power has been set, the pan detection symbol

and the

selected power setting will ﬂ ash alternately on the display

and the hob will remain cold. If a (ferrous) pan is not placed

on the cooking zone within 1 minute, the cooking zone will

automatically switch off.

• Residual warmth indicator

- A cooking zone that has been used intensively will retain

heat for several minutes after it has been switched off. An

'H.' appears in the display as long as the cooking zone is

hot.

Settings

Operation