Operation Manual

7.5.2015212166
6
 To ignite the burner, press the selected burner button and
turn it to the maximum power position (large flame
symbol). Electric spark from the ignition device ignites the
gas.
 If the ignition device is out of order (power failure or
humidity), use a match or a lighter to ignite the gas. Keep
the button pressed for approximately 10 seconds after
ignition to stabilize the flame.
 After that you can set the burning power between high and
low position to suit your cooking requirements. Button
positions between , and are not
recommended. In these positions the flame is not
stabilized and may be extinguished.
• To shut the burner off turn the button to the right, to the OFF
position .
Always push the button in before starting to turn it!
Če se po 15 sekundah gorilnik ni prižgal, zaprite gorilnik in
počakajte najmanj 1 minuto. Potem ponovite postopek
prižiganja.
Če plamen gorilnika ugasne-vseeno zaradi katerega vzroka-
zaprite gorilnik in pred preizkusom ponovnega vžiga
počakajte vsaj 1 minuto.
Burner type
Dish diameter
Large (3kW)
220 - 260mm
Auxiliary (1 kW)
120 - 180mm
Double (WOK) - interior
flame (1kW)
120 - 180mm
Double (WOK) - all
flame
220 - 300mm
If you failed to ignite the burner after 15 seconds,
shut the burner off and wait for at least one minute
before the next attempt.
If the burner flame goes out (for whatever reason),
shut the burner off and wait for at least one minute
before next attempt.