Operation Manual

7.5.2015212155
5
a)
b)
Large and auxiliary burner
a) 1. Burner crown cap
2. Burner crown with burner cap support
3. Thermal probe (thermally protected burners only, only
certain models)
4. Ignition plug
5. Nozzle
6. Bowl of the burner
Double burner (wok) - certain models only
b) 1. Burner cup WOK
2. Burner crown cap
3. Burner crown with burner cap support
4. Thermal probe (thermally protected burners only, only
certain models)
5. Ignition plug
6. Nozzle
7. Nozzle
Twin burner model:
 Cooking burners are controlled with relevant burner
buttons. These are marked with small flame and large
flame symbols (see section ‘Description of the appliance’).
 Always turn buttons over the large flame symbo l
towards the small flame symbol and back. Operating
positions are all positions between the two symbols.
 Burners are ignited by means of ignition device, fixed
adjacent to each burner (certain models only).
Models with one double burner (WOK):
 Cooking burners are controlled with relevant burner buttons.
These are marked with small flame and large flame symbols
(see section ‘Description of the appliance’).
 Turn the knob to the left over the large flame position for the
interior burner section to the small flame of the interior
burner section . Here the knob needs to be pushed in
order to turn it to the large flame position of the interior,
intermediate and exterior burner section and further
to the position of small flame for the interior, intermediate
and exterior burner section then turn it back. Working
position is between the large and the small flame symbol.
Ignition and operation of
burners