Operation Manual

7.5.201521211616

 Connections may be carried out by a qualified technician

only.

 The appliance must be connected in accordance with the

standing ragulations, and it may be used only in well ventilated

rooms. Before any attempt to connect the appliance read

carefully the instructions!

 Before installation and connection check if the local connection

specifications (type and pressure of gas) correspond to the

specifications of the appliance.

 The technical specifications of the appliance are indicated

upon the rating plate.

 The appliance is not suitable for connection to the vapour

release channel (chimney). The appliance must be installed

and connected in accordance with the standing regulations.

Special attention must be paid to the particular ventilation

requirements.

 Connect the appliance in accordance with the regulations of

the local gas supplier.

 Gas cooker is equipped with the EN 10226 R1/2 gas

connection on the right side.

 The appliance is delivered with hose adapter for bottled

gas (propane - butane) and with non metal sealing (for

some delivery country only).

 During connection hold the elbow R 1/2 to prevent it from

turning.

 Use metal or non metal gaskets for connection packing. Metal

gaskets may be used only once. Thickness of non-metal

gaskets can be deformed up to 25% maximally.

 Connect the appliance to the liquid gas supply by means of

attested flexible hose.

 The hose may not touch the bottom side of the appliance, or

the back and the top of the oven and should not go through

area, where it could be clogged.

 If the kitchen element below the hob has an integrated oven, it

must be fitted with the cooling fan and the connection hose

must entirely be made of metal (for example flexible stainless

steel gas connection hose). Connection hose must not touch

the top oven panel or the hob bottom.

Safety precautions

Gas connection

Connection