Operation Manual

7.5.2015212188

Stubborn stains should be removed with wet cloth and then

rubbed dry with a dry cloth to the brilliance. Never use such

cleaners for cleaning of aluminum. Clean plastic and coated

surfaces with liquid non-abrasive cleaning agents using soft

cloth.

 Gas grid, cooking area and burner components should be

cleaned with warm water and mild detergent for manual

washing of dishes.

 Thermal element and ignition device should be cleaned

with soft brush. To ensure perfect operation, these

elements must always be thoroughly clean.

 Clean the burner crown and cap. Specially check and

clean gas outlet openings on burner crown, and keep them

dirt free at all times.

 Upon completion of cleaning wipe all components dry and

replace them carefully to their respective slots. Oblique

position of components may cause troubled ignition of

burners.

Note! Crown caps are coated with black enamel.

Discoloration

of caps, due to high temperatures, is inevitable, but it has no

adversary effect on normal operation of burners.

Ceramic glass hob should be cleaned only when completely

cooled down, preferably after each use, otherwise even the

slightest stains remaining after cooking may burn into the hob

surface with each following use.

For regular maintenance of ceramic-glass hob use special

cleansing agents, produced in such way to create protective

film upon the surface.

Before each use, wipe the dust and other particles from the

hob

- they may scratch the surface (Fig. 1).

Caution: use of steel wool, abrasive cleaning sponges, and

abrasive detergents can scratch the surface of the hob. The

surface may also be damaged by the use of aggressive

sprays and inappropriate liquid chemicals (Fig.1 and 2).

Cooktop burners

Cleaning and

maintenance of ceramic-

glass hob

fig. 1