Operation Manual

136356

Power setting Maximum power time

(in seconds)

182

2 164

3 246

4 328

5 410

682

7 164

8 164

• Switch the relevant hotplate ( 2 or 4) and consequently

switch the extended hotplate ring by pressing the relevant

sensor (see the control element board illustration). The LED

signal lamp above the indicator displays the extended ring is

on. Now select the random heating power for both hotplate

rings together. Extended ring may be switched off either by

consequent pressing the sensor or by reducing the heating

power to “0”, as well as by simultaneous pressing of both the

(-) and (+) sensor. It may of course be switched off also by

switching off the entire hob.

Switching the second hotplate ring on

• The rear right hotplate (4) is equipped with the extended

hotplate ring, which is switched on by pressing the special

second ring sensor. The signal lamp above the indicator

displays the ring is on.

Switching the third hotplate ring on

• The front left hotplate (2) is equipped with two extended

hotplate rings. To switch the second ring on, press the special

second ring sensor. The LED signal lamp above the indicator

displays the ring is on. To switch on the third ring press the

same sensor once again, another LED signal lamp is on.

Both extended rings are switched off by repeated pressing

the sensor. They may also be switched off by switching off the

relevant hotplate or the entire hob.

Switching the extended

hotplate rings on

(hotplates 2 and 4)