Operation Manual

136356
Countdown of preset time
• By activating the timer (indicator “00”) you have switched on
the time countdown By touching the (+) sensor the countdown
starts with 1 minute, and increases in one minute intervals.
By pressing the sensor (-) the countdown starts from 99
minutes. Desired time is selected by pressing either the (+) or
(-) sensor. Preset time may be changed at random during the
countdown. The expiry of selected time is signaled by the beep
for a few seconds. It may be switched off by pressing one of
the timer sensors.
Timer controlled period of operation for a particular
hotplate
• In this mode you are able to select the exact operation time
for any hotplate. After the time has elapsed the hotplate
automatically turns off.
Time may be preset parallel for one randomly selected
hotplate which must be switched on. First switch the timer
on by pressing the timer sensor. Next touch of the timer
sensor brings the decimal dot on the time indicator, along with
intermittent fl ashing of power fi gure and a symbol “t” of the
selected hotplate.
If more than one hotplate is in operation you may select the
particular hotplate by several consequent pressing on the
timer sensor until your desired hotplate is indicated by fl ashing
power indicator. Now set the desired preset time by pressing
the (+) or (-) sensor.
If you accidentally touch the (+) or (-) sensor of the timer
controlled hotplate during the countdown procedure, a symbol
‘’t’’ appears, warning you that this particular hotplate is timer
controlled. Power setting may be changed by keeping the
sensor pressed for certain time.
• After the expiry of the preset time the selected hotplate is
automatically switched off and the alarm is heard. The hotplate
power indicator displays ‘’0’’. The remaining heat warning “H”
appears.
Warning beep is switched off by pressing one of timer sensors.
• Other hotplates without the preset operation time continue with
normal operation.
This function is incorporated for safer operation of your hob.
Each hotplate is equipped with the time limit switch. The period
of operation is calculated in accordance with the last selected
power setting of a particular hotplate.
If the power setting is not changed for a while, the hotplate
will be switched off automatically after a certain period of time,
29
Limited time of operation