Operation Manual

136356

• Immediately after a particular hotplate is switched off, or in

case the complete hob is switched off, the indicator shows the

letter “H” as a warning that the “hotplate is hot”. The period

of this warning signal is calculated in accordance with the

working time and the power setting of the hotplate. When the

warning signal is on do not touch the hotplate or place any

temperature sensitive objects on the relevant hotplate. Danger

of burns!

• When the indicator goes off, the hotplate surface is cool

enough to be touched safely.

• For safety reasons the remaining heat display is restored in

memory in case of power failure, and when power is regained

continues to ﬂ ash until the expiry of countdown time from

preceding operation. It is therefore possible that the “H”

indication is still on if the power failure took long time, although

the hotplate is completely cold, but it may also be still hot in

case the power failed for only a short period.

• Heat remaining indicator of the warming up hotplate is the

ﬂ ashing LED signal lamp of the hotplate. This means that the

hotplate is switched off, but still to hot for touching.

• The hob is switched off by pressing the main ON/OFF sensor.

The sound signal beeps and all indicators go off, except for

those hotplates which are still hot and display the warning “H”

sign as an indication of the remaining heat. When all hotplates

indicate power level “0”, or when this is the result of the preset

timer operation, the complete hob is switched off after a 10

second lapse, with only the remaining heat warning “H” still

illuminated.

Once the hob is on you have two timer operation alternatives:

1 time countdown without the switch off function

2 setting the timer controlled period of operation for a

particular hotplate

• Timer is activated by pressing the timer sensor, the display

indicates “00”. Set the time between 1 and 99 minutes: this

setting may be altered at any time in 1 minute intervals by

touching the (+) or (-) sensor. Constant press of either sensor

changes the setting faster, in 5 minute intervals.

Next touch of the timer sensor sets the time back to ‘’00’’.

Remaining heat display

Switching the complete

hob off

Timer function