Operation Manual

172736
the adjacent high kitchen cabinet is 40 mm.
• The use of hard wood decorative borders around the worktop
behind the appliance is allowed, in case the minimum distance
remains as indicated on the installation illustrations.
• Minimum distance between the built-in cooktop and rear wall
is indicated at the illustration for the installation of the built-in
cooktop.
• The appliance may be installed in any worktop with a thickness
from 30 mm to 50 mm.
• Worktop must be placed absolutely horizontal.
• Suitably protect the edges of the cut aperture.
• By means of the supplied screws 4 (or 6 by some models)
fasten the supplied tightening brackets 4 (or 6 by some
models) fasten to the front and the rear side of the cooking
hob and to the prepared aperture.
• Connect the cooking hob to the mains power supply (see
instructions for the connection of the cooking hob to mains
power supply).
• Insert the hob into the cut aperture.
• Press the hob fi rmly towards the worktop from above.
34
Dimensions of the built-
in hob opening
Installation procedure