Operation Manual

172736

• If both the (+) and (-) sensor are preset together the hotplate is

switched off.

• If all the hotplates indicate the “0” power setting, the hob is

switched off after 10 seconds.

• If any of the sensors is activated for more than 10 seconds

the hob is switched off, the beep sounds, and the indicator

displays the ﬂ ashing “F” signal.

• If the sensors are covered with an object, or the surface is

covered with spilt liquid, the hob is switched off.

• Error may occur also during the period of initial

synchronization or during the operation. In such cases the

display indicates relevant combination of symbols. If the fault

can not be removed, call the after sale assistance.

• In case an error occurs during the operation, the hob is

automatically switched off. Flashing “F” appears on the

indicator relevant to the hotplate where the error occurred. The

sound signal is repeated at 30 second intervals for a period of

15 minutes when it goes off automatically.

Safety functions and

error display