Operation Manual

172736

This function protects the hob from accidental activation or

change of power level by children or pets. Child lock is activated

by pressing the relevant sensor for about 3 seconds, and

signaled by the signal LED above the sensor which illuminates

for a few seconds. Child lock may be activated with the hob in

the on or off mode. The lock prevents activation of any sensors

except for the main switch sensor and the child lock sensor.

Once the hob is locked, a particular hob may be switched off

only by pressing both the (+ and -) sensor, or by using the main

switch to switch off all hotplates, while the lock remains active.

If you try to activate any sensor during the lock mode, the child

lock signal LED will illuminate for a few seconds. If any hob is in

the automatic timer mode, the countdown setting runs normally,

and when the time elapses the hob is switched off and a beep is

heard. Child lock may be deactivated at any moment by pressing

the relevant sensor, followed by a short beep. Signal LED above

the sensor goes off.

Once the hob is on you have two timer operation alternatives:

1 time countdown without the switch off function

2 setting the timer controlled period of operation for a

particular hotplate

Timer is activated by pressing the timer sensor, the display

indicates “00”. Set the time between 1 and 99 minutes: this

setting may be altered at any time in 1 minute intervals by

pressing the (+) or (-) sensor. Constant press of either sensor

changes the setting faster, in 5 minute intervals.

Countdown of preset time

• By activating the timer with the display indicating ‘’00’’ you

started the countdown of preset time. By pressing the (+)

sensor the display starts from one minute and continues in

one minute steps. By pressing the (-) sensor the display is

set at ‘’99’’ minutes. Select the desired time by pressing (+) or

(-) sensor. Time setting may be changed randomly during the

operation.

• When the time elapses a beep is heard and display indicates

ﬂ ashing ‘’00’’ which may be switched off by pressing any timer

sensor.

Timer function

Blocking the hob

operation