Operation Manual

243910

• Cooking hobs can be installed into worktops that are 30 to 50

mm thick.

• The kitchen furniture element underneath the hob should not

be ﬁ tted with a drawer. If the kitchen furniture element as a

horizontal partition wall, it should be installed no less than 60

millimeters from the lower surface of the worktop. The space

between the partition wall and the hob must be empty; no

objects should be placed into that gap.

• On the furniture back wall there should be a cutout with width

of at least 175 mm along the entire width of the furniture

element.

• Only type EVP4, EVP2... ovens ﬁ tted with a cooling fan may

be installed underneath this cooking hob.

Installation procedure

• The worktop should be installed completely horizontally.

• The cutoff surfaces should be appropriately protected.

• Attach the fastening elements (4) with the supplied screws (4)

to the left and right wall of the cooking hob and the worktop

cutoff.

• Connect the cooking hob to the power mains (see instructions

for connecting a cooking hob on a power network).

• Insert the cooking hob into he cutoff and press it heavily from

above against the worktop.

• For screwing down the ﬁ xing clip it is not allowed to use

screws longer than 6,5 mm.

Worktop cutout

dimensions