Operation Manual

135074

Switch on

• Press the sensor (F) to switch the extended hotplate ring on.

Signal lamp (G) above the indicator is on.

• Power setting is selected for both rings together.

Switch off

• To switch the extended hotplate ring off press the sensor (F),

again, or bring the heating power to ‘’0’’, or press both (+) and

(-) (B and C) sensors simultaneously, or switch the hob of by

pressing the main ON/OFF sensor (A).

This function is incorporated for safer operation of your hob.

Each hotplate is equipped with the time limit switch. The period of

operation is calculated in accordance with the last selected power

setting of a particular hotplate. If the power setting is not changed for

a while, the hotplate will be switched off automatically after a certain

period of time, depending upon the power setting level (higher power

setting – shorter time - see chart).

Power setting Maximum operation time in hrs

6 1,5

7 1,5

8 1,5

9 1,5

• If both the (+) and (-) (B and C) sensor are preset together the

hotplate is switched off.

• If all the hotplates indicate the “0” power setting, the hob is switched

off after 10 seconds.

• If any of the sensors is activated for more than 10 seconds the hob

is switched off, the beep sounds, and the indicator displays the

ﬂ ashing “F” signal.

• In case several sensors are covered with any object (kitchen cloth,

for example) the hob shall be turned off automatically, and this is

signalled by the beep.

• Error may occur also during the period of initial synchronization or

during the operation. In such cases the display indicates relevant

combination of symbols. If the fault can not be removed, call the

after sale assistance.

• In case an error occurs during the operation, the hob is

automatically switched off. Flashing “F” appears on the indicator

relevant to the hotplate where the error occurred. The sound signal

Extended hotplate ring

(certain models only)

Safety functions and

error display