Operation Manual

135074

• Worktop must be placed absolutely horizontal.

• Suitably protect the edges of the cut aperture.

• Screw the attached ﬁ xing elements 4 with attached screws

4 on the right and the left panel of the hob to the already

prepared hole in the opening.

• Connect the cooking hob to the mains power supply (see

instructions for the connection of the cooking hob to mains

power supply).

• Insert the hob into the cut aperture.

• Press the hob ﬁ rmly towards the worktop from above.

• For screwing down the ﬁ xing clip it is not allowed to use

screws longer than 6,5 mm.

When installing several glassceramic hobs it is necessary to

separate them with intermediary short strip (to be purchased

separately

- 144079).

Installation procedureInstallation procedure

Installation of several

glass-ceramic hobs

Installation of several

glass-ceramic hobs