Operation Manual

135074
• The appliance may be installed in any worktop with a thickness
from 30 mm to 50 mm.
• Bottom kitchen element must not have a drawer. It must be
fi tted with a horizontal plate 100 mm away from the worktop
bottom surface. Space between the plate and the hob must be
empty and no objects may be stored or kept there.
• Rear side of the kitchen element must also have a 100 mm
high opening along the entire width of the element, and the
front part must have an opening of no less than 6 mm.
NOTE!
On some appliances the gasket is already installed!
28
Built-in induction hob
opening dimensions