Operation Manual

134492
Wrong connection may permanently damage parts of the
appliance and render your warranty void! Electric connection may
be carried out by qualifi ed service personnel only!
Mains voltage of the user (230 V) must be verifi ed with the
measuring device!
• Before attempting the connection, check whether the voltage
indicated on the rating plate corresponds to the actual mains
voltage.
• Mains lead should be minimum 1,5 m long, so that it may be
plugged into the socket before the appliance is completely
pushed to the wall.
• Earthing wire should be installed in such manner to be the
last one pulled out in case the safety relief device of the mains
lead should fail.
Connection
• Using the screwdriver open the connector cover at the rear of
the appliance. Release two locks located at either side of the
connector bottom.
• Mains lead must be led through the relief safety device,
protecting the mains lead cable from disconnection.
• Tighten the relief device securely and close the connector
cover.
Connection may be carried out by means of:
• rubber coated connection cables, model H05 RR-F 3x1,5 with
yellow-green earthing cable;
• PVC insulated connection cables, model H05 VV-F 3x1,5 with
yellow-green earthing cable; or any other suitable cables.
Colour code
L1 = live lead. Color of the wire is usually brown or black.
N = neutral
The colour is usually blue.
Beware of the correct N-connection!
PE = earthing wire
The colour is green/yellow.
34
Connection to the power
supplay