User's Manual

SKU 94878 For technical questions, please call 1-800-444-3353. Page 5
OPERATING INSTRUCTIONS
Note: For additional information regarding the parts listed in the following pages, refer to
the Assembly Diagram at the end of this manual.
Note: Before using, wash the Top Cover (2) and the four Mesh Trays (3) in hot, soapy
water, taking care to rinse completely. Dry with a soft cloth. Wipe the base
with a soft clean cloth or sponge. NEVER IMMERSE BASE, CORD OR PLUG
IN WATER OR ANY OTHER LIQUID.
Before using, make sure the Dehydrator unit is in the OFF position and unplugged.
See FIGURE 1 and the Assembly Drawing on page 9.
Top Cover (1)
Mesh Tray (3)
Base Assembly
Power Switch (11)
FIGURE 1
Clean all parts before assembling. Always wash the Trays (3) and Top Cover (2)
before each use. This will prevent food contamination.
Place the base assembly on a flat, smooth surface near an electrical outlet.
1.
2.
3.