User Manual
Table Of Contents
Transmitter:
Red jack: power output to camera
Yellow jack: connect to camera video jack
Red and black cable: power input positive and negative.
Camera Video Jack
Camera Power Jack
Receiver:
Yellow jack: connect to monitor video jack
Red and black cable: power input positive and negative.
Monitor Video Jack
Power Negative
Power Positive
Power Negative
Power Positive
Wireless Video Transmitter & Receiver Kit
Notice: connect receiver to monitor, and connect transmitter
to rear camera. They are generally used as car backup camera
system.
Parameters:
Receiver/transmitter frequency: 5740MHZ
Voltage: DC 12V;
Video format: NTSC/PAL; Recommended use 12V
Working TEMP: -10°C- +80°C RH
Receiver sensitivity: -85Dbm;
Working current: DC12V/300mA;
AV OUT interface: RCA jack.
Package List:
1 x Wireless Receiver
1 x Wireless Transmitter
2 x 5.8GHz antenna
1 x Manual
Warning: Transmitter can supply power to camera, power input equals
to output. If you supply 12V to transmitter, transmitter will supply 12V to
camera.
Please do not supply high voltage (over 12V) to transmitter if your
camera cannot withstands high voltage (over 12V).
Please check the voltage range of your camera before connecting it to
transmitter.