Wi-Fi Remote USER MANUAL + WARRANTY INFO Remote UM ENG.
FIRMWARE UPDATES GoPro releases important updates for the Wi-Fi Remote through firmware updates. Visit gopro.com/firmware to download the latest updates. WI!FI REMOTE FEATURES 1. Remote LCD Display 2. SHUTTER/SELECT Button > 3. POWER/MODE Button > 4. Remote LED Recording Light 5. Mini-USB port (cable included) 6. Removeable Wrist Strap 7. Removeable Attachment Key NOTE: The Wi-Fi Remote works by connecting to a Wi-Fi BacPac properly assembled to a HD HERO or later camera.
SETTING UP YOUR WI!FI REMOTE PAIRING WITH YOUR CAMERA Follow these steps the first time you use your Wi-Fi Remote with a HD HERO or later camera. It is recommend that you charge your Wi-Fi Remote for two hours before first use. ! See BATTERY LEVEL AND CHARGING. [DEFINE USAGE RULES AROUND WORDS “PAIRING” AND “CONNECTING” HERE AND IN WI-FI BACPAC MANUAL] 1. Power on the Wi-Fi Remote by pressing . 2. The Remote LCD Display will show the connection animation.
USING YOUR WI!FI REMOTE REMOTE LED RECORDING LIGHT POWERING ON/OFF When connected to a single HD HERO2 or later camera, the Remote LED Recording Light will flash the same patterns as the camera. When the Wi-Fi Remote is OFF or in power-saving mode, press to power ON. Powering OFF the Wi-Fi Remote will also power OFF the connected cameras. The Wi-Fi BacPacs will remain powered ON so that you can quickly reconnect the Wi-Fi Remote when you power ON again.
CONTROLLING YOUR CAMERA DIRECTLY When the Wi-Fi Remote is connected to a single HD HERO2 or later camera, the remote mirrors the controls on the camera: pÐÐ2FCÐ0CKMRCÐ*!"Ð"GQNJ?WÐQFMUQÐRFCÐQ?KCÐGLDMPK?RGMLÐ as the camera’s LCD Display pÐÐ2FCÐ5G $GÐ0CKMRC¦QÐ and as those on the camera buttons work the same ! See your camera’s User Manual for instructions. 8 1 WiFi Remote UM ENG.
USING YOUR WI!FI REMOTE WITH MULTIPLE CAMERAS Connection Manually start polling for new connections. See MANUALLY CONNECTING ADDITIONAL CAMERAS below. Firmware Update Update the Wi-Fi Remote firmware. See FIRMWARE UPDATES above. USING REMOTE MODES WITH A HD HERO OR WITH MULTIPLE CAMERAS When the Wi-Fi Remote is connected to a single HD HERO camera or to multiple cameras, it does not mirror the controls of a single camera. Instead, use Remote Modes to control the Wi-Fi Remote and connected camera(s).
USING MULTI MODE "BLANK PAGE# The Wi-Fi Remote remembers each camera’s Camera Mode when it connects to the remote. MULTI MODE is a quick way to return each camera to its “startup” mode a"er you have changed camera modes using the REMOTE MODE menu. To activate MULTI MODE, follow the directions in CHANGING CAMERA MODES and select MULTI from the menu.
TROUBLESHOOTING WARRANTY / DISCLAIMERS Visit gopro.com/support for troubleshooting information. This product is guaranteed against manufacturing defects for one (1) year from the original date of purchase. GoPro’s sole obligation in the event of such defects during this period is to repair or replace the defective part or product with a comparable part or product at GoPro’s sole discretion.
Learn about more GoPro products at: gopro.com 130-00430-000 REVA Remote UM ENG.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
