THE REMOTE WATERPROOF REMOTE CONTROL USER GUIDE
The First Step Powering On + Off You may need to upgrade your camera’s software before you can use The Remote. For step-by-step instructions, go to gopro.com/update. POWERING ON Press the Power button The Basics POWERING OFF Press and hold the Power button for two seconds. . 1 2 1. 2. 3. 4. 5. 6. 7.
Pairing the Remote and Your GoPro Capturing Video and Photos The Remote can control up to 5 cameras at a time from up to 196 feet (60m) away in optimal conditions. Your camera recognizes only one remote at a time. CHANGING MODES 1. Press the Mode button repeatedly to cycle to the mode that you want. button to start capturing. 2. Press the Shutter Dependent on camera model, terrain, obstructions, electromagnetic interference, and environmental conditions. * PAIRING THE REMOTE WITH YOUR CAMERA 1.
Visit gopro.com for more information © 2020 GoPro, Inc. All rights reserved.
Features: radio 2.4 GHz BLE 5.0 Transmit power MAX 7dBm Operation Frequency: 2402-2480MHz MAX PK Antenna Gain: 0.64 dBi Software version: V0.5 Hardware version: EVT1 The operation temperature is -10~35℃ Input Rated Voltage: 3.
DECLARATION OF CONFORMITY Manufacturer: GoPro, Inc. 3025 Clearview Way San Mateo, CA 94402 USA Declares under our sole responsibility that the product: Product Type The Remote Regulatory Model Number: RMRU3 Trade name: GoPro Software version: v0.5 Hardware version: EVT1 Notified Body/NB No./Cert. No.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
IC Radiation Exposure Statement This EUT is in compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and has been tested in accordance with the measurement methods and procedures specified in IEEE 1528. Réglementations de l’IC : cet appareil contient un ou plusieurs émetteurs/récepteurs exempts de licence conformes aux normes CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
