User Manual

Step 4 : build the arm joigning the camera support to the main frame
You will need parts 14 (x2), 15 and 16
Use parts 15 et 16 to connect together the parts 14. Part 15 will receive the servo for controling the
horizontal movement of the gimbal. Part 16 is the connector between the gear and and the arm for
horinzontal movement. Do not fix the tubes now, you will need a loose coupling for the next step
Step 5 : Assembly the arm with the support (step 3 and 4)
You will need part 17 for this step. I recommend to pre drill hole with the screws, it will be more
easy to screw them again when the part will be in position,