Operation Manual

USING THE LCD BACPAC

The camera’s default setting keeps the LCD screen

powered on. Below are options to change how the

LCD powers o.

CAMERA SET MENU OPTIONS  LCO AND LCF

Check Page 2, section “Firmware Update”, to ensure your

camera has the necessary rmware update for your LCD

screen. If so, proceed to Steps 1 & 2 below:

1. LCO (default): LCD ON. This setting keeps the LCD

screen powered on, continuously, while the camera

is on. LCD will only power o if the camera is turned

o or if you quickly press the side LCD button.

2. LCF: LCD OFF. This setting auto powers the LCD

screen o 60 seconds aer the last camera button

press. The camera will remain on and only the LCD

will power o. If recording videos or photos, the

recording will continue uninterrupted while the

screen is powered o. A quick press of any button

will power the LCD screen back on.

TURNING LCD SCREEN ON/OFF

1. Pressing the LCD button quickly will power the

screen on and o when in preview mode.