User's Manual

38 39
/ Settings
SPOT METER
Spot Meter is good for filming into a setting where the lighting is
different from where you are, such as filming the outdoors from within
a car or filming a shaded environment while standing in the sun. Spot
Meter automatically sets the exposure based on a single spot in the
middle of the image. When Spot Meter is turned on, [
] appears
on the camera displays. The options for this setting are Off (default)
and On.
Note: Changes that you make to the Spot Meter setting in Video mode apply only to video capture.
To adjust this setting for another mode (Photo, Burst, or Time Lapse), adjust the setting within
that mode.
LOOPING
Looping lets you continuously record and save only the best
moments, which helps to conserve space on your microSD card.
Available intervals for looping are 5, 20, 60, and 120 minutes. For
example, if you select a 5-minute interval, the previous 5 minutes is
saved when you stop recording.
You can also select Max as the interval for Looping. With this option,
the camera records until the memory card is full, then overwrites the
content. The default option for Looping is Off.
Note: To use Looping, be sure that your microSD card has sufficient space to create the loop segment
based on the interval that you select. If the microSD card becomes full, Looping does not overwrite
the content.
PRO TIP: Files are written to your memory card in segments. When
viewing this content on a computer, you might see separate files for
each time segment. Use GoPro Studio soware to combine the files
into a longer video.
/ Settings