User manual

12 13
/ Getting Started
POWERING ON + OFF
HERO4 Session automatically powers on when
you press the Shutter/Select button [
] to begin
capturing video or Time Lapse photos. When you
press the Shutter/Select button [
] again to stop
recording, the camera automatically powers off to
conserve battery power.
PRO TIP: When carrying your camera in a bag or pocket, place the
camera upside down in a frame (with the Shutter/Select button [
]
covered) to protect the camera from accidentally capturing video or
Time Lapse photos. To prevent the frame from marking the surface of
the camera, leave the latch on the frame open.
/ Getting Started
DISPLAYING STATUS INFO
Short press the Info/Wireless button to display status information
about your camera. The screen cycles through the information below,
then automatically turns off.
Note: To exit these screens sooner, press and hold the Info/Wireless button for three seconds.
• Video resolution/FPS/FOV
• Time Lapse photo resolution/
FOV/interval
• Remaining microSD card
memory for each mode
• Protune status
• Spot Meter status
• Wireless status
• Battery status