User manual

42 43
PHOTO CAPTURE MODE
When you connect your camera to the GoPro App or the remote, you
can access one capture mode in Photo mode: Single photo.
CAPTURING A SINGLE PHOTO
1. Select Single photo mode [
] on the GoPro App or the remote.
2. Tap the Record button on the app, or short press the Shutter/
Select button [
] on the remote or the camera. The camera
beeps once, the camera status lights flash, and the counter on the
camera status screen increases by one.
Note: When your camera is connected to the GoPro App or the remote, it remains on in standby mode
aer capturing video or photos.
/ Photo Mode
PHOTO SETTINGS
You can change the photo settings by connecting HERO4 Session
to the GoPro App or the remote.
Megapixels
HERO4 Session captures photos at 8MP and 5MP.
8MP Ultra Wide
(default)
Largest field of view. Good for action shots.
5MP Medium
Mid-range field of view. Good for shots where
you want the subject to fill the frame.
Note: Changes that you make to Megapixels in Photo settings apply only to photo capture. To adjust
this setting for multi-shot capture, adjust Spot Meter in Multi-Shot settings.
/ Photo Mode