User manual

84 85
Your HERO Session
™
comes with a Standard Frame.
Note: To prevent the frame from marking the surface of your camera, leave the latch on the frame
open when storing your camera in a frame for a long period of time.
The HERO Session camera is waterproof to 33’ (10m) with the
side door closed—no additional housing is needed when using the
camera in or around water.
NOTICE: The Standard Frame does not provide additional waterproof
protection for your camera.
/ The Frame
TO SECURE THE CAMERA IN THE FRAME:
1. Open the latch.
2. Rotate the camera to the desired orientation, and then slide it into
the frame. The back of the frame has a raised edge. Be sure the
back of the camera sits flush against it.
3. Close the latch.
/ The Frame