User manual
28 29
/ Capturing Photos / Capturing Photos
To Capture Burst Photos:
1. Press the Info/Wireless button to turn on the camera status screen.
2. Be sure the photo capture mode is set to Burst:
a. Press the Info/Wireless button repeatedly to cycle to Camera
Settings, then press the Shutter/Select button [
] to select it.
b. Press the Shutter/Select button [ ] repeatedly until you get
to the Photo icon [
].
c. Press the Info/Wireless button to highlight the photo capture
mode (Single or Burst).
d. If the capture mode is Single, press the Shutter/Select button
[
] to change it to Burst.
e. Press the Info/Wireless button repeatedly to cycle to Done,
then press the Shutter/Select button [
] to select it.
3. Press the Info/Wireless button to cycle to Enter Photo Mode, then
press the Shutter/Select button [
] to select it.
4. Press the Shutter/Select button [ ]. Your camera beeps once,
then beeps once aer each photo is captured. The camera status
lights blink while the camera is capturing photos.
5. To exit Photo Mode, press the Info/Wireless button to cycle to
Exit Photo Mode, then press the Shutter/Select button [
] to
select it.