User manual
26 27
/ Capturing Photos / Capturing Photos
2. Be sure the photo capture mode is set to Single:
a. Press the Info/Wireless button repeatedly to cycle to Camera
Settings, then press the Shutter/Select button [
] to select it.
b. Press the Shutter/Select button [ ] repeatedly until you get
to the Photo icon [
].
c. Press the Info/Wireless button to highlight the photo capture
mode (Single or Burst).
d. If the capture mode is Burst, press the Shutter/Select button
[
] to change it to Single.
e. Press the Info/Wireless button repeatedly to cycle to Done,
then press the Shutter/Select button [
] to select it.
3. Press the Info/Wireless button to cycle to Enter Photo Mode, then
press the Shutter/Select button [
] to select it.
4. Press the Shutter/Select button [ ]. Your camera beeps once,
then beeps once aer a photo is captured. The camera status
lights blink while the camera is capturing photos.
5. To exit Photo Mode, press the Info/Wireless button to cycle to
Exit Photo Mode, then press the Shutter/Select button [
] to
select it.
CAPTURING BURST PHOTOS
Burst captures up to 10 photos in 1 second, so it is perfect for
capturing the definitive moment in fast-action sports. To change Burst
photo settings, see Changing Camera Settings (page 30).