User manual

24 25
/ Capturing Photos
CAPTURING TIME LAPSE PHOTOS
Time Lapse captures a series of photos at specified intervals. You can
use Time Lapse to capture photos of any activity, so you can choose
the best ones later.
The default interval for Time Lapse is 0.5 second. To select a different
interval, see Changing Camera Settings (page 30).
To Start Capturing Time Lapse Photos:
Press and hold the Shutter/Select button [
] for about three
seconds until the Time Lapse photo icon [
] appears on the
camera status screen. Your camera powers on, emits two beeps, and
automatically begins capturing Time Lapse photos. The camera status
lights blink while the camera is capturing photos.
To Stop Recording:
Press the Shutter/Select button [
]. The camera stops recording,
beeps several times, and automatically powers off to maximize
battery life.
CAPTURING A SINGLE PHOTO
Single photos are captured at a default resolution of 8MP. To change
photo settings, see Changing Camera Settings (page 30).
To Capture a Single Photo:
1. Press the Info/Wireless button to turn on the camera status
screen.
/ Capturing Photos