Operation Manual

GoPro Studio 2.5 User Manual
Adjusting 3D Convergence
When a 3D clip is selected in the Media Bin, the 3D CONVERGENCE controls appear in
the right-hand column of GoPro Studio’s EDIT Room. These controls allow you to change
the feeling of depth and distance in your 3D video clips.
Select a 3D clip in the Media Bin and then click on the Disclosure Triangle to the left of
the words “3D CONVERGENCE” to open the 3D CONVERGENCE controls panel giving
you access to the following settings
• HORIZONTAL Use the slider or step controls to modify the relative horizontal
positioning between the left and right camera views.
• VERTICAL Use the slider or step controls to modify the relative vertical
positioning between the left and right camera views
• SKEW Use the slider or step controls to modify the relative skew or rotational
values between the left and right camera views.
• KEYFRAMES Use the + button to add a 3D convergence keyframe to the clip.
This locks in the 3D convergence settings for the current frame in the clip. You
can then move the Play-head to another location on the Playback Slider to add
another keyframe where you can have different 3D convergence settings
• SWAP EYES Use this checkbox to swap the left and right camera views in the
selected clip.
Click on the Disclosure Triangle to close the 3D CONVERGENCE controls panel.
TIP: Clicking on the Enable Checkbox will toggle the 3D CONVERGENCE controls
adjustments ON or OFF for all clips in the Media Bin. You can use this to quickly
switch back and forth between seeing the clips with the 3D convergence adjustments
applied and the original images.
Enable Checkbox
88