Operation Manual

GoPro Studio 2.5 User Manual

Framing Clips

GoPro Studio’s FRAMING controls allow you to change the composition of your clips.

Select a clip in the Media Bin and then click on the Disclosure Triangle to the left of the

words “FRAMING” to open the FRAMING controls panel giving you access to the

following settings:

• ZOOM Use the slider or step controls to adjust scale of the image.

• HORIZONTAL Use the slider or step controls to adjust the horizontal location of

the image.

• VERTICAL Use the slider or step controls to adjust the vertical location of the

image.

• ROTATION Use the slider or step controls to slightly rotate the clip clockwise or

counter-clockwise.

• H.ZOOM Use the slider or step controls to adjust the horizontal scaling of the

image.

• H.DYNAMIC Use the slider or step controls to adjust the horizontal stretch point

of the image. This control is best used in tandem with the H.ZOOM control.

• KEYFRAMES Use the + button to add a framing keyframe to the clip. This locks

in the framing control settings for the current frame in the clip. You can then

move the Play-head to another location on the Playback Slider to add another

keyframe where you can have different framing control settings. This is a great

way to have the framing control settings change over the duration of the clip.

• FLIP Use the check boxes to enable or disable horizontal or vertical flipping on

the image.

Click on an individual control to reset only its value.

Click on the Disclosure Triangle to close the FRAMING controls panel.

TIP: Clicking on the Enable Checkbox will toggle the FRAMING CONTROLS adjustments

ON or OFF for all clips in the Media Bin. You can use this to quickly switch back and forth

between seeing the clips with the framing adjustments applied and the original images.

Enable Checkbox