Operation Manual

GoPro Studio 2.5 User Manual
Configuring Your Wi-Fi BacPac™ (optional)
1. Select your Wi-Fi BacPac from the list, and press CONFIGURE.
2. Change the name and password (password must be at least 8 ASCII characters).
3. Click OK.
NOTE: We highly encourage you to change your password, as your Wi-Fi BacPac is set
to the factory default password ‘goprohero’.
Troubleshooting Tips
We recommend unplugging any peripheral devices that may be plugged into your
computer (including USB hubs and devices, external displays or Thunderbolt devices)
before updating your GoPro devices.
If your GoPro devices are not recognized in the Device Window, try the following:
1. Press the REFRESH in the Device Window.
2. Unplug the device(s) and power cycle, then reconnect device(s) with power ON.
3. Try connecting your device(s) to a different USB port on your computer.
4. Try re-launching the GoPro Studio application, and/or re-launching the Device
Window.
Contact GoPro Support for additional information: http://gopro.com/support
66