Operation Manual

GoPro Studio 2.5 User Manual

NOTE: The default frame rate for an export is determined by the frame rate used by the

majority of the clips on the Storyboard. Exporting to frame rates above 30 fps is not

recommended if you wish to retain compatibility with modern electronic devices and

streaming services..

If FLUX processing has been applied to any clip on the Storyboard, the EXPORT Window

will show an option to disable it. Simply uncheck the ‘Enable checkbox to disable Flux on

the current export. You might want to do this to speed up rendering times as Flux

enabled exports require a significant amount of GoPro Studio processing, which slows

down the export process. However, keeping it enabled will result in the smooth looking

slow and fast motion effects.

Select the export preset that best meets the needs for your project and distribution outlets

and then do the following:

1. Browse to the desired folder location and type a filename in the ‘File name’ box.

2. Click SAVE to start the export process.

3. A progress bar will appear giving you an idea of how long the export will take.

NOTE: Exporting may take a few minutes or even longer depending on the length of your

Storyboard and the speed of your computer’s processor.