Operation Manual

GoPro Studio 2.5 User Manual

Framing Clips

The FRAMING CONTROLS allow you to change the composition of your clips. Select a

clip on the Storyboard and then click on the Disclosure Triangle to the left of the words

“FRAMING CONTROLS” to open the FRAMING CONTROLS panel giving you access to

the following settings:

• ZOOM When you want to get closer to the subject in your video, use the slider or

step controls to adjust scale of the image.

• HORIZONTAL Use the slider or step controls to adjust the horizontal location of

the image.

• VERTICAL Use the slider or step controls to adjust the vertical location of the

image.

• ROTATION Use the slider or step controls to slightly rotate the clip.

• H.ZOOM When mixing 4x3 and 16x9 video sources, use this slider or step

controls to adjust the horizontal scaling of the image.

• H.DYNAMIC Use this slider or step controls to adjust the horizontal stretch point

of the image. This control is best used in tandem with the H.ZOOM control and

helps preserve the normal look of people if they have been stretched by 4x3 to

16x9 conversion.

• KEYFRAMES For advanced users, the framing controls can be keyframed. Use

the + button to add a framing keyframe to the clip. This locks in the framing

control settings for the current frame. You can then move the Play-head to

another location to add another keyframe where you can have different framing

control settings.

• FLIP Use the check boxes to enable or disable horizontal or vertical flipping on

the image. Enable both of these options if you simply shot your scene upside-

down.

Click on an individual control to reset its value.

Click on the Disclosure Triangle to close the FRAMING controls panel.

TIP: Clicking on the Enable Checkbox will toggle the FRAMING adjustments ON or OFF

for the selected clip on your Storyboard. Checking the box enables the controls.

Unchecking it disables them. You can use this to quickly switch back and forth between

seeing the clips with the framing adjustments applied and the original images.

Enable Checkbox