Operation Manual

GoPro Studio 2.5 User Manual

Previewing Clips in the Player Window

If you recently converted files in the IMPORT Room and pressed the PROCEED TO

STEP 2 button, you should see your converted GoPro CineForm files in the Media Bin on

the left-hand side of the work area. If you don’t see any files in the Media Bin, follow the

steps below.

1. Click the ADD MEDIA button and browse to the location of your converted GoPro

CineForm files.

2. Highlight the files you wish to import and click Open.

3. After the files have loaded into the Media Bin, press ‘Command+S’ on your

keyboard to save your project.

Clips loaded into the Media Bin are represented as thumbnails, similar to how they look in

the Import Bin in the IMPORT Room. Along with each thumbnail, the following clip details

are indicated:

• Filename

• Image Size

• Frame rate or Frame Count

• 2D or 3D

• Video or Time lapse Icon

• Duration

You can select clips in the Media Bin by clicking on them or by using the up and down

arrow keys on your keyboard to cycle through them.

To remove a clip from the Media Bin, select the clip you wish to remove and click on the

REMOVE CLIP button at the bottom of the Media Bin.

To remove all clips from the Media Bin, click the CLEAR ALL button at the bottom of the

Media Bin.