Operation Manual

GoPro Studio 2.5 User Manual
CAMERA SOFTWARE UPDATES
As a company, GoPro is always innovating and always improving the features in our
cameras. One of the ways we do this is by releasing periodic camera software updates.
These provide camera performance enhancements, bugs fix and new features. GoPro
Studio makes it easy to install these software updates onto your GoPro cameras.
Refer to the list below to know which update method is right for your particular GoPro
HERO camera model.
• GoPro HERO2 camera software is updated by following the steps in the section
called, “Updating Hero2 Camera Firmware
”.
• GoPro HERO3 camera software is updated through our support website
at gopro.com/support/product-updates-support
.
• GoPro HERO3+ camera software is updated by following the steps in the section
called, “Updating HERO3+ Camera Software
”.
• GoPro Hero4 camera software is updated by following the steps in the section
called, “Updating HERO4 Camera Software
.”
Updating HERO4 Camera Software
The following explains how to update the camera software in your GoPro HERO4
camera. In addition to the camera, you’ll need a memory card and a USB cable.
Step 1 – Make sure a memory card is plugged into the camera.
Step 2 – Turn on the camera.
Step 3 – Plug in the USB cable to the compter.
Step 4 – Plug the other end of the USB cable into the camera.
At this point, if GoPro Studio is installed, it will detect the camera and if there is an update
available, it will open the Camera software update window and display the release notes
for the latest update.
Click CONTINUE to move on to the next step.
17