Operation Manual

GoPro Studio 2.5 User Manual
GoPro Studio Preferences
The GoPro Studio Preferences panel can be accessed via the GoPro Studio menu or
by pressing ‘command+,’ on your keyboard. In the Preferences panel, you can enable or
disable the following features by checking or unchecking the box next to the listed feature
(a check means it is enabled):
• Use time of day for timecode uses the time of day from the source file and
writes it into the timecode track of the converted file.
• Use reel name in destination appends the reel name to the filename of the
converted file.
• Auto-start conversions causes files to automatically start converting as soon as
they are added to the conversion list.
• Automatically Import From GoPro Cameras causes the media from a GoPro
Camera to be automatically copied to the computer when the camera is
connected
• Auto Save periodically saves a back-up file of the current project.
In addition to being able to turn Auto Save ON or OFF, you can also choose the time
interval that GoPro Studio will use for automatically saving a back-up file of the current
project. You have the choice of the following intervals:
• ½ Minute (30 Seconds)
• 1 Minute
• 5 Minutes
• 15 Minutes
• 30 Minutes
• 60 Minutes
NOTE: The Auto Save feature is turned ON by default and it’s a good idea to keep it
enabled. This way, if you ever have a system crash or accidently close GoPro Studio
without saving the main project file, you can recover your work using the Auto Save
project file. The Auto Save project file is saved in the same folder as the main project file.
16