User's Manual

[settings icon] To adjust White Balance, verify camera is in Settings menu. If not
showing, press [mode] repeatedly until it appears:
1. Press [S] to enter [settings icon] menu.
2. Use [mode] to cycle through Settings to locate [Capture Settings icon].
3. Press [S] to enter Capture Settings.
4. Use [mode] to locate [WB icon].
5. Press [S] to enter White Balance sub-menu.
6. Use [mode] to cycle through options.
7. Select highlighted option by pressing [S].
8. To exit White Balance sub-menu, use [mode] to cycle to [EXIT], then press
[S].
9. To exit Capture Settings menu, use [mode] to cycle to [EXIT], then press
[S].
PRO TIP: Consider manually setting White Balance when operating in the
following conditions:
 3000K for incandescent or sunrise/sunset lighting
 5500K for daylight or sunlit shooting
 6500K for cool white fluorescent skylight lighting
 Cam RAW for full file information
STARTUP DEFAULT [default icon]
Set which camera mode is immediately active when camera is powered ON.
[icon] Video (default)
[icon] Photo
[icon] Photo Burst
[icon] Time Lapse
[icon] Last
[settings icon] To adjust Default mode, verify camera is in Settings menu. If not
showing, press [mode] repeatedly until it appears:
1. Press [S] to enter [settings icon menu.
2. Use [mode] to cycle through Settings to locate [set up icon].
3. Press [S] to enter Set Up.
4. Use [mode] to locate [default icon].
5. Press [S] to enter Default sub-menu.
6. Use [mode] to cycle through options.
7. Select highlighted option by pressing [S].
8. To exit Default sub-menu, use [mode] to cycle to [EXIT], then press [S].
9. To exit Set Up menu, use [mode] to cycle to [EXIT], then press [S].