User's Manual

[spot meter icon] Turn on the Spot Meter when filming from within a dark space
pointing the camera into a brighter setting, such as filming the outdoors from inside
a car. When set to ON, the [spot meter icon] appears in the LCD window.
[TABLE]
OFF (default)
ON
[settings icon] Verify camera is in Settings menu. If it is not showing, press [mode]
repeatedly until it appears:
1. Press [S] to enter Settings menu.
2. Use [mode] to cycle through Settings menu to locate Spot Meter.
3. Press [S] to enter Spot Meter sub-menu.
4. Use [mode] to cycle through options and select highlighted option by
pressing [S].
5. To exit, use [mode] to cycle to [EXIT], then press [S].
VIDEO LOOPING
[video looping icon] Not certain when the desired action will happen, but want to
be sure it gets captured on video? Set camera to Video Looping to continuously
“record and over-write” until [S] is pressed.
[TABLE]
Off (default)
Max Camera records until memory card is full, then over-writes with new
video. *
5 min Camera records for 5 minutes, then over-writes and begins a new
video.
20 min Camera records for 20 minutes, then over-writes and begins a new
video.
60 min Camera records for 60 minutes, then over-writes and begins a new
video.
120 min Camera records for 120 minutes, then over-writes and begins a new
video.
* Multiple chapter files are written to the memory card. This allows for small
segments of content to be over-written during loop recording.
[settings icon] To turn Video Looping ON, verify camera is in Settings menu. If it is
not showing, press [mode] repeatedly until it appears:
1. Press [S] to enter Settings menu.
2. Use [mode] to cycle through Settings menu to locate Video Looping.
3. Press [S] to enter Video Looping sub-menu.
4. Use [mode] to cycle through options and select highlighted option by
pressing [S].
5. To exit, use [mode] to cycle to [EXIT], then press [S].