Operation Manual

CURVED AND FLAT SURFACE MOUNTING
The extension arms and quick-release buckles can be
used in a number of different orientations depending on
what type of surface you are attaching the 3D HERO System
to. For example, attach included extension arms to the quick-
release buckles in order to achieve proper orientation when
attaching the waterhousing to curved surfaces.
Note: When removing the quick-release buckles from
the adhesive mounts, push both quick-release buckles
out evenly to avoid jamming the buckles.
FRONT HELMET AND CHEST MOUNTING
Front Helmet Mount:
Attach the Front Helmet Mount to the center fingers with
the center mount adapter and long thumb screw.
Chest Mount:
Attach the curved quick-release buckle (and straight arms
if necessary for proper angle adjustment) to the center
fingers on the waterhousing with the
center mount adapter
and long thumb screw.
WARNING: Single center mount configuration is not
recommended for high impact or high vibration use.
8