Operation Manual

UsInG tHe 3D Hero systeM

IMPORTANT: To capture 3D video and photos, both cameras

must be set to identical resolution, record mode and frame

rate settings.

To begin recording video or photos:

1. Power on both cameras.

2. Verify that SD cards are present in both cameras,

that batteries are charged and that both cameras are

set to the same resolution, record mode and frame

rate. Upon insertion of the sync cable, right camera

will automatically set itself to UP and le camera will

automatically set

itself to UPd. This is necessary for

capturing synchro

nized 3D video and photos.

Press master shutter button on top of 3D HERO

System

housing to initiate synchronized 3D video

or photo capture.

Additional Notes:

• Blinking front LCD screen and red LED record lights may

or may not blink in sync. This is OK and has no eﬀect on

whether or not each camera is in sync with the other.

• Should the battery die or SD card become full on either

camera, both cameras will save the ﬁles and stop recording.

• Always use brand name SD cards with a Class 4 rating

or higher.

• The 3D HERO System can also capture 3D photos in time

lapse mode every 2, 5, 10, 30, or 60 seconds. Photo every

1 second mode is not possible when capturing 3D photos.

To capture 3D photos in 3D time-lapse mode, change the

mode on both cameras to Photo Every “X” mode and press

the shutter button to begin recording.