Operation Manual
IMPortant safety +
HanDlInG InforMatIon
WARNINGS
Failure to follow these safety instructions could result
in fire, electric shock, or other injury or damage to
the 3D HERO System or other property.
Improper alignment of your 3D images or misuse of the
GoPro CineForm Studio soware while viewing with 3D
glasses may cause eye strain or headaches.
HANDLING
The 3D HERO System contains sensitive components.
Do not drop, disassemble, open, crush, bend, deform,
puncture, shred, microwave, incinerate, paint, or insert
foreign objects into the cameras or 3D sync cable.
Do not use the 3D HERO System if it has been damaged.
AVOIDING WATER AND WET ENVIRONMENTS
WHEN NOT IN WATER HOUSING
Do not use the 3D sync cable in rain, near wash basins, or
in other wet locations when cameras are not inserted in the
water housing. Do not spill any food or liquid on the 3D sync
cable. If the 3D sync cable gets wet, unplug from camera and
allow it to dry thoroughly before using again. Do not attempt
to dry the 3D sync cable with an external heat source, such as
a microwave oven or hair dryer. Damage to the 3D sync cable
caused by contact with liquid is not covered under warranty.
USING CONNECTORS AND PORTS
Never force a connector into a port. Check for obstructions in
the port. Make sure that the connector matches the port and
that you have positioned the connector correctly in relation
to the port.
11