Manual

Instructions for Use
Use the USB Type-C power cord to charge the GOOVIS Powerbank Base
through the power input port.When charging, the indicator light flashes;
when the battery is full, the indicator light stays on.
1. Charge the GOOVIS Powerbank Base
1) Align the power port of the device that needs to be powered (such as
the GOOVIS Wireless Cast) with the power output port with magnetic
attraction function on the GOOVIS Powerbank Base.
2) Short press the power switch on the GOOVIS Powerbank Base once, the
indicator light of the mobile power base will stay on and start to supply
power to the external device.
3) Quickly and shortly press the power switch of the GOOVIS Powerbank
Base twice, the indicator light of the GOOVIS Powerbank Base is off, and
the power supply to the external device is stopped.
2. The GOOVIS Powerbank Base supplies power to the device
DC 5V/2A
Power Supply
Note: When the Cast is not needed, it is recommended to charge the PowerBank Base
separately.
Note: When the PowerBank Base and the Cast are attached together, please pay
attention to check whether the PowerBank Base is in the off state after use.