User Manual

WaveAce

WA-GSM-E-RevA

CURSOR PLACEMENT

1. Press the CURSORS front panel button. The Cursor

menu opens.

2. If you want to set the mode to Manual, press the Mode

option button and select Manual. Press the Type option

button and select Voltage or Time. Press the Source

option button and select a source (CH1, CH2, MATH,

REFA, or REFB). Press the CurA or CurB option button

and turn the Adjust front panel knob to adjust the cursors.

If you want to set the mode to Track, press the Mode

option button and select Track. Press the Cursor A or

Cursor B option button and select a source. Press the

CurA or CurB option button and turn the Adjust front

panel knob to adjust the cursors. If Track is selected, both

cursors move in unison and both appear brighter in the

grid.

If you want to set the mode to Auto, press the Mode option

button and select Auto. When you select measurement

parameters using the MEASURE front panel button, the

cursors are automatically displayed.

The measurement values are displayed on the top right corner.

The cursor selected for placement is indicated by a highlighted

fine grain icon in the menu and the cursor itself has a higher

brightness in the grid.