User Manual

WaveAce
26
WA-GSM-E-RevA
Auto Setup
The WaveAce Series Digital Storage Oscilloscopes has an Auto Setup
function that identifies the waveform type and automatically adjusts controls
to produce a usable display of the input signal. Four Auto Setup waveform
options are available: Multi-Cycle, Single-Cycle, Rising Edge, and
Falling Edge. Press the AUTO front panel button, and then press the menu
optoin button adjacent to the desired waveform as follows:
Note: Use the waveform menu button to Undo an applied Auto Setup.
Option
Description
（Multi-cycle）
Auto set the screen and display several cycle signal.
（Single-cycle）
Set the screen and auto display single cycle signal.
（Rising edge）
Auto set and show the rising time.
（Falling edge）
Auto set and show the falling time.
（Undo Setup）
Causes the oscilloscope to recall the previous setup.