User Manual

Getting Started Manual
WA-GSM-E-RevA
21
Setting Probe Attenuation
Probes are available with various attenuation factors which affect the
vertical scale of the signal. Push the Channel button and then the Probe
menu option button. Attenuation options for 1X, 10X, 100X, and 1000X are
available as follows:
Select the attenuation that matches your probe.
PLEASE NOTE THE FOLLOWING:
 The default setting for the Probe option is 1X.
 Be sure that the Attenuation switch on the probe matches the Probe
option in the oscilloscope. Switch settings are 1X and 10X.
 When the Attenuation switch on the probe is set to 1X, the system
bandwidth is limited to 6MHz. To use the full bandwidth of the
oscilloscope, be sure to set the switch to 10X.