User Manual

WaveAce
18
WA-GSM-E-RevA
HORIZONTAL CONTROLS
 Horizontal Position knob - Turn to adjust the horizontal position of
all channels and math waveforms (the position of the trigger relative
to the center of the screen). The resolution of this control varies
depending on the timebase setting. Press to set the horizontal
position to zero.
 HORI MENU - Press to display the Horizontal menu. You can use
the Horizontal menu to display the waveform and to zoom a
segment of a waveform.
 Time/Div knob - Turn to change the horizontal time scale to magnify
or compress the waveform. When Window Zone is enables, it
changes the width of the Window Zone by changing the window
timebase. WhenTime/Div control is set to 100 ms/div or slower and
the trigger mode is set to Auto, the oscilloscope enters the scan
acquisition mode. In this mode, the waveform display updates from
left to right. There is no trigger or horizontal position control of
waveforms during scan mode.