User Manual

Getting Started Manual

WA-GSM-E-RevA

VERTICAL CONTROLS

 Volts/Div knobs (CH1/CH2)- Turn to adjust the volts/division setting

(vertical gain) of the corresponding channel (CH1 or CH2). Press the

knob to toggle between fine (variable) and coarse (fixed)

adjustments.

 Channel buttons (CH1/CH2) - Press a channel button (CH1 or CH2)

to turn that channel ON or OFF and open the Channel menu for that

channel. You can use the Channel menu to set up a channel. When

the channel is ON, the channel button is lit.

 Vertical Position knobs (CH1/CH2) - Turn to adjust the vertical

position of the corresponding channel (CH1 or CH2). Press to set the

vertical position to zero.

 REF - Press to display the Ref Wave menu. You can use this menu

to save and recall two reference waveforms (REFA and REFB) in

internal memory.

 MATH - Press to display the Math menu. You can use the Math

menu to use the oscilloscopes Math functions.