User Manual

WaveAce

WA-GSM-E-RevA

GENERAL CONTROL BUTTONS

 HELP - Displays context-sensitive online help. Press Help than

another front panel button and information about that button will be

displayed.

 DEFAULT SETUP - Press to reset the oscilloscope's settings to the

default factory configuration. For a list of default settings, see

Recalling Factory Settings.

 AUTO - Press to have the oscilloscope automatically identify the type

of waveform and adjust the controls to produce a usable display of

the input signal. When you press the AUTO front panel button, the

Auto Set menu opens. You can use this menu to display multiple-

cycle signals, a single-cycle signal, the rising edge, the falling edge

or recall the previous setup.

RUN CONTROL BUTTONS

 SINGLE - Press to acquire a single waveform. Each time you press

the SINGLE button, the oscilloscope acquires another waveform.

When the oscilloscope detects a trigger it completes the acquisition

and stops.

 RUN/STOP - Press when you want the oscilloscope to acquire

waveforms continuously. Press RUN/STOP again to stop the

acquisition,